Skip to product information
  • Vetonek Mesa auxiliar madera maciza de mango Ø55x60 cm

Mesa auxiliar madera maciza de mango Ø55x60 cm

96,69 €
96,69 € 96,69 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Esta mesa auxiliar está diseñada para ser el foco de atención en tu habitación con un diseño moderno y práctico. Material robusto y estable: La madera maciza de mango, una madera dura tropical robusta, es muy apreciada para la fabricación de muebles por su excepcional durabilidad y resistencia. Las bonitas vetas de la madera hacen que cada mueble sea ligeramente diferente al resto.Estructura estable y duradera: La estructura de hierro de la mesita realza tu hogar con un estilo industrial y proporciona una durabilidad y estabilidad excepcionales.Robusto tablero: El robusto tablero de la mesa auxiliar es perfecto para colocar tus fotos enmarcadas, plantas en macetas y otros objetos decorativos.Amplio espacio de almacenaje: La mesa auxiliar de 2 niveles proporciona suficiente espacio para que puedas tener todas las cosas del día a día organizadas y al alcance.Fácil de mantener: Gracias a su superficie lisa, el salón es fácil de limpiar con un paño y requiere menos mantenimiento. Información útil:Cada artículo es único, con variaciones de color y veta. La entrega es aleatoria garantizando la exclusividad y la individualidad del producto.

  • Color: Marrón y negro
  • Material: Madera maciza de mango, hierro
  • Dimensiones: 55 x 60 cm (diámetro x alto)
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.