Skip to product information
  • Vetonek Mesa consola madera maciza de mango negro y dorado 90x30x75cm

Mesa consola madera maciza de mango negro y dorado 90x30x75cm

263,02 €
263,02 € 296,03 €
You save 11% (33,01 €)
Tax included. Shipping calculated at checkout.

Description

Nuestra mesa consola de madera tiene un acabado negro y dorado y será un aporte atemporal para tu hogar. La mesa está hecha de madera de mango maciza y acero resistente y es muy duradera. La madera de mango es una madera dura tropical con fuerza para soportar peso y también soporta el desgaste del tiempo, haciéndola estable y duradera. La tapa resistente es ideal para colocar algunos elementos decorativos como jarrones o plantas en macetas. Los 2 cajones brindan un amplio espacio de almacenamiento para mantener varios artículos perfectamente organizados. La estructura de acero le da a la mesa un toque industrial. Cada paso del proceso de construcción se lleva a cabo con el mayor cuidado, ya sea el pulido, pintura o lacado. La mesa consola es fácil de montar. Nota importante: Los colores pueden variar de una pieza a otra, por lo que cada pieza es única y ligeramente diferente del resto; la entrega es aleatoria.

  • Color: Negro y dorado
  • Material: Madera maciza de mango, acero con recubrimiento en polvo
  • Dimensiones: 90 x 30 x 75 cm (largo x ancho x alto)
  • Altura del cajón: 15 cm
  • Con dos cajones
  • Lijado, pintado y barnizado
  • Requiere montaje: Sí
  • ADVERTENCIA: Para evitar el vuelco, este producto debe usarse con el dispositivo de fijación a la pared proporcionado.
  • Legal Documents:

    Puedes encontrar más detalles sobre cómo evitar que los muebles se vuelquen aquí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.