Skip to product information
  • Vetonek Mesa de comedor de madera maciza de mango 140x80x76 cm

Mesa de comedor de madera maciza de mango 140x80x76 cm

284,72 €
284,72 € 320,45 €
You save 11% (35,73 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Esta mesa de comedor de madera de estilo industrial será un aporte llamativo para su hogar. La bonita mesa de comedor está hecha a mano con madera maciza de mango, que es famosa por su calidad robusta y duradera. Cada paso del proceso se ha llevado a cabo con el mayor cuidado, ya sea el pulido, la pintura o el lacado. La artesanía y las hermosas vetas de la madera hacen que cada mueble sea único y ligeramente diferente del resto. Su fuerte estructura de hierro con recubrimiento en polvo contribuye a la estabilidad y robustez de la mesa. La camilla es fácil de montar. Nota importante: Los colores pueden variar de una pieza a otra, lo que hace que cada una de nuestras mesas de comedor sea única. La entrega es aleatoria. La madera de mango rugosa natural se distingue por una superficie rústica, lo que hace que el tablero de la mesa sea un poco irregular.

  • Material: Madera de mango maciza + estructura de hierro con recubrimiento en polvo
  • Dimensiones: 140 x 80 x 76 cm (largo x ancho x alto)
  • Acabado: Pulido, pintado y lacado

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.