Skip to product information
  • Vetonek Túneles de malla 3 uds de acero y polietileno negro

Mesh 3 UDS of steel and black polyethylene

75,66 €
75,66 € 85,16 €
You save 11% (9,50 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These network tunnels help plants and vegetation grow stronger and healthier by helping with moisture and soil temperature durable material: this network tunnel has 6 metal wires, which makes it lasting and easy to insert into the soil. Use Fácil: The network tunnel has a single -piece design where the tubes pass through the sleeves inside the tunnel. This allows you to open it as an accordion and fold it carefully after use, which facilitates its installation and storage. Practical design: This mesh tunnel is equipped with two plugs, allowing a comfortable opening and closing of the ends as necessary DIVERSE USES: The mesh tunnel is a versatile solution for several plants. It offers shadow of intense sunlight, allows efficient air flow, retains moisture and provides protection against insects, birds and animals. In addition, you can comfortably water your plants directly through the network.

  • Color: black
  • Network material: PE (polyethylene)
  • Tube wire material: steel
  • Network size: 4 x 1 m (length x wide)
  • Network mesh size: 4 x 1 mm (long x width)
  • Total dimensions: 300 x 50 x 48.5 cm (length x width x high)
  • Delivery contains:
  • 3 x network tunnels

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.