Skip to product information
  • Metaltex Tendedero Ciclone Vario 40 m

Metaltex Cyclone Vario 40 m

148,53 €
148,53 € 167,17 €
You save 11% (18,64 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Cycllone Metaltex clothing clothing can simultaneously dry a large amount of clothing thanks to its 40 -meter drying length. The clothing clothesline is equipped with 6 independent wings to dry sheets, curtains and large towels. In addition, it is partially adjustable in height. The clothesline can be used halfway or completely open. When it opens halfway, the shelf adapts to small spaces such as bathroom or dressing room. The drying shelf has 2 brackets for hangers with space for 6 hangers. The Vario Ciclone is a robust tower clothes tower and easy to wear. It is made of aluminum with metal racks with an EPOTHERM antist -coating. The EPOTHERM is an exclusive surface treatment that gives the product a better resistance and a longer life, even for outdoor use. The clothesline does not crack, it does not oxidize or peel. It is recommended to store the indoor drying tower after use abroad. The clothing clothesline folds quickly and fits easily in a small 10 cm wide space.

  • Color: Silver
  • Material: Epotherm coating steel
  • Dimensions (open): 78 x 72 x 137 cm (length x width x high)
  • Dimensions (folding): 78 x 7.7 x 137 cm (length x width x high)
  • Drying length: 40 m
  • Partially adjustable in height
  • It can be used open or completely open
  • With perch supports
  • Adapts to small spaces
  • Resistant to UV rays and oxidation

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.