Skip to product information
  • Metaltex Tendedero con alas Rotterdam 22 m

Metaltex tendard with wings Rotterdam 22 m

84,75 €
84,75 € 95,39 €
You save 11% (10,64 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The versatable and folding metaltex tendard, Rotterdam model, is robust and strong, with a total drying length of 22 meters. The folding clothing clothesline is ideal for drying clothes, towels and bedding, since you can adjust the height of its wings. The drying shelf is made of steel with LDPE cladding (low density polyethylene), a universal standard lining, strong but soft, for iron/steel wire products. The coating also protects the tendard against oxide. You can easily fold the clothesline to a compact size and save it in a practical way inside the home after using it outdoors.

  • Color: White
  • Material: LDPE coating steel
  • Dimensions (open): 134 x 58 x 98 cm (length x width x high)
  • Dimensions (folding): 118 x 58 x 5 cm (length x width x high)
  • Drying length: 22 m
  • The wings are adjustable in height
  • Oxidation
  • Easy to use

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.