Skip to product information
  • Vetonek Mueble para TV con luces LED blanco brillante 120x35x15,5 cm

TV furniture with bright white LED lights 120x35x15.5 cm

85,57 €
85,57 € 96,31 €
You save 11% (10,74 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With a modern and practical design, this TV furniture with LED lights will definitely become the center of attention of your room. Durable material: the plywood has an exceptional quality, with a smooth surface and also has strength, stability and moisture resistance. LED RGB Leds: This TV support has RGB LED lights, with different menus to change the color of The lights and allow the color to automatically adjust differently. Ample storage space: The furniture is designed with two drawers to have organized and at reach. Note: Each product comes with a mounting manual in the box to facilitate the assembly. The product has a USB connector, but the USB USB supply source is not included. The screws and the tacos for the inside of the wall They are not included. Search and use screws and tacos suitable for your walls. If you are not sure, seek professional advice. Read and continue every step of the instructions carefully.

  • Color: White with shine
  • Material: plywood
  • Dimensions: 120 x 35 x 15.5 cm (length x width x high)
Do not use this article if any component is broken, torn or foul. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.