Skip to product information
  • Noordwand Papel de pared Topchic Wooden Planks gris oscuro y azul

Noordwand Topchic Wall Paper Wooden Dark and Blue Gray Planks

37,26 €
37,26 € 41,94 €
You save 11% (4,68 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Wooden Wooden Planks Dark and Blue Gray is part of the Noordwand Topchic collection, which includes a wide variety of roles painted with modern prints to classic and beautiful current colors. The non -woven wallpaper has an upper paper layer with a non -woven back, which allows the glue to be applied directly on the wall instead of the wallpaper leaf. This facilitates the placement. The material is strong, easy to place and can be used perfectly on rough walls or new construction walls, and if necessary, it is fast and easy to remove. This durable non -woven wallpaper has a wooden planks in dark and blue gray, and will give the room a used barn appearance! In addition, dirt can be cleaned with a sponge or a soft brush and a soft soap solution.

  • Color: dark and blue gray
  • Material: non -woven fabric
  • Length: 10 m
  • Width: 53 cm
  • Advantages:
  • Strong
  • Good color solidity
  • It does not expand, so there are no visible unions
  • Does not shrink and is resistant to tears
  • Most equitable wall vision
  • Easy to apply without the use of a wallpaper
  • Easier to remove
  • Note:
  • The background must have a uniform color (it can be seen through non -woven paper)
  • General:
  • No print
  • Easy to remove dry so the back wall will suffer less damage
  • Check the instructions for glue application on the label
  • You can scrub

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.