Skip to product information
  • Vetonek Persiana opaca enrollable beige 100x175 cm

Opaca Rollable Beige 100x175 cm

36,58 €
36,58 € 41,17 €
You save 11% (4,59 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The opaque rolled blinds are the perfect solution for a 100% light reduction. This makes it the ideal option to block incoming light in any room in your home or office. It is perfect for the bedroom! The back of the blind is covered with a thermoplastic silver color layer. This layer not only blocks incoming light completely, but its thermal qualities also keep the warmest room in the winter and cooler in the summer. Thanks to the assembly accessories included, this blind is easy to install and use. Install the blind on the wall or roof with the screws and the wall keys included, or hang the blind of a window. The traction chain can be mounted on the left or right side. Keep in mind that the dimensions given are the dimensions of the fabric. The width of the upper rail, including mounting accessories, will be 3 cm wider than the width of the blind. The delivery includes a lower PVC plastic lane of 100 cm, 1 x upper aluminum lane 100 cm, 1 x opaque Polyester persian 100% with silver reflective back covering, 2 x supports, 2 x hooks, 1 x chain of plastic balls, 4 x screws and 4 x of wall keys Warning: young children can be strangled by the ties of the laces, chains, tapes and internal cords in the product. To avoid strangulation and tangle, keep the cables out of reach of young children. The laces can be wrapped around a child's neck. Start the beds, cribs and furniture from the windows that cover the laces. Do not tie the cables together. Make sure the cables do not twist and create a bond.

  • Chain color: white
  • COLOR OF THE PERSIANA: Beige
  • Persiana dimensions: 100 x 175 cm (high x width)
  • Chain length: 180 cm
  • Fabric material: 100% polyester
  • Metal shaft diameter: 18 mm

  • Material: Polyester: 100%
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.