Skip to product information
  • Vetonek Parque infantil para bebés con colchón tela lino azul marino

Baby Park for Babies With Mattress Navy Blue Fabric

69,98 €
69,98 € 78,77 €
You save 11% (8,79 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This compact children's playground is specially designed to keep your baby comfortable and quiet at home or outside it. Travel Cun 2 in 1: The crib for babies provides a safe space for the baby to sleep and relax, in addition to including a great space to play. Folding design: Baby bed is also easy to fold. Thus, you can take it with the transport bag included and you will have a crib for the comfortable and safe baby wherever you go. Resistant structure: The travel cradle is made with aluminum tubes and iron tubes, so it is robust, stable and resistant to shaking. Practical material: Linen fabric has a simple and clean appearance, and is breathable and durable. In addition, the breathable mesh fabric allows you to monitor the baby. Removable click: the baby crib mat is soft and comfortable. It also has a zipper that allows it to be easily removed and cleaned. Note: Each product comes with a mounting manual in the box to facilitate assembly. This product is not suitable for children over 3 years.

  • Color: navy blue
  • Material: linen, mesh, iron, aluminum fabric
  • Total dimensions: 110 x 82 x 67 cm (wide x high x high)
  • Folded dimensions: 70 x 60 x 20 cm (wide x high x high)
  • Mattress dimensions: 100 x 60 x 3.5 (wide x high x high)
Warning. Do not place the park near an open flame or other heat source. Do not use the park without the base. Make sure the park is completely mounted and that all blocking mechanisms are activated before placing your child in it.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.