PíCNIC table for polypropylene children 89.5x84.5x48 cm

92,62 €
92,62 € 104,25 €
You save 11% (11,63 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This modern Píconic table with banks is perfect for children to mount a picnic and play outdoors. Durable material: Pícon's table is made of PP. The polypropylene (PP) is a popular plastic, which is light, hard and resistant to the blows. Integrated design: the integrated design of this table with Pícon banks allows you to move it from room to room with ease, in addition to being able to take it to the garden. Multiple uses: The exterior table is the ideal place for children to begin their new art and craft projects, chat with their friends, monitor a Pínic and play. Useful information: To facilitate assembly, each product is delivered with a manual.

  • Color: blue and green
  • Material: PP (100% polypropylene)
  • Total dimensions: 89.5 x 84.5 x 48 cm (wide x high x high)
  • Bank dimensions: 74 x 17.5 cm (length x wide)
  • Table dimensions: 71 x 48.5 cm (long x width)
  • Max. loading: 30 kg
  • UV -resistant
  • Apt for 4 children over 18 months
  • Warning: only for domestic use.
  • WARNING: It must be used under the direct supervision of an adult.
Small ball warnings. Danger of suffocation. Only for domestic use. To use inside and outdoors. From 18 months. Maximum load weight: 30 kg. The supervision of an adult is required at all times. It requires adult assembly. Attention. Only for domestic use. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.