Puerta de jardín acero gris antracita 400x150 cm

573,78 €
573,78 € 573,78 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Esta puerta de jardín es una gran combinación de fuerza, estabilidad y resistencia a la corrosión! ¡Sin duda, será un punto de entrada ideal para el jardín, el patio o la terraza! Material duradero: El acero es un material muy duro y fuerte. Ofrece solidez y estabilidad.Diseño práctico: La puerta de patio está soldada con malla de alambre grueso para una mayor resistencia. Ofrece un alto nivel de seguridad y también un fabuloso acceso a tu propiedad.Diseño con cerradura: La puerta del jardín trasero tiene un juego de cerradura y manija, que garantiza que la puerta del patio se pueda cerrar bien.

  • Color: Gris antracita
  • Material: Acero
  • Dimensiones totales de la puerta: 400 x 150 cm (ancho x alto)
  • Dimensiones de un panel de puerta: 190,5 x 100 cm (ancho x alto)
  • Anchura del poste: 6 cm
  • Chapa de acero con agujeros densos
  • Con 1 juego de cerradura, manija y clavija de tierra
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Estructura
  • 2 x Postes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.