PVC greenhouse Painted steel Transparent powder 160x400x190cm

114,67 €
114,67 € 129,06 €
You save 11% (14,39 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This great greenhouse is ideal for both rookie and experienced gardeners. It's great to sow and protect plants from cold weather. Stable structure: The garden greenhouse has a resistant steel structure with powder coating, which guarantees its solidity and stability. UV resistant is resistant: the transparent greenhouse cover allows sunlight to penetrate and retain the heat in order to minimize possible damage caused by meteorology. As is resistant to tears, it constitutes a great alternative against traditional greenhouses. Practice protection for plants: the exterior greenhouse is a great solution to protect the aromatic herbs of the cold and also of the spring frosts. Front and war Roller windows: It has a front door with a zipper to easily enter. Along with the 8 rolled windows, the plant nursery has a good air circulation and creates the optimal microclimate for the cultivation of any plant. Useful information: To facilitate assembly, each product is delivered with a manual. Note: The roof does not support strong snowfall.

  • Color: transparent
  • Dimensions: 160 x 400 x 190 cm (wide x high x high)
  • Cover material: PVC (polyvinyl chloride)
  • Structure material: tubular steel with powder coating
  • With resistant roof to breakage
  • 8 windows with mosqu for
  • 1 front door with zipper
The greenhouse is not a construction building or a greenhouse for recreational purposes. It is an independent and temporary agricultural installation destined only to recreational gardening.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.