Skip to product information
  • Vetonek Radiador toallero 480 x 480 mm conector lateral y central

Dowel radiator 480 x 480 mm lateral and central connector

79,81 €
79,81 € 89,82 €
You save 11% (10,01 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This towel radiator is designed for double purpose, as a towel heater and space heater. It helps the bathrooms stay hot, mold free and is suitable for drying large towels and long bathrobes Meanwhile. This towel is designed to connect to its central heating system. Thanks to the hot water circulation system, its towels will dry in a short time. This towel heater with heating has thicker and higher performance rails, and gives it a higher heat performance than most common towels in the market. It is easy to mount and maintain. The scope of the delivery includes wall and screws.

  • Color: White
  • Material: Steel
  • Style: curve
  • Wall assembly
  • Side and central connector
  • Includes 4 supports and 4 screws
  • Technical data:
  • Heat output: 215 W (188.8 Btu)
  • Max. Operating pressure: 5 MPa
  • Maximum operating temperature: 110 ℃
  • Dimensions:
  • Number of rails: 8
  • General dimensions: 480 x 480 mm (width x height)
  • Vertical rail: 40 x 30 x 1.5 mm (width x depth x thickness)
  • Horizontal rail: 22 x 1.0 mm (φ x thickness)
  • Distance between the center of two side connectors :: 430 mm
  • Distance between the center of two central connectors: 50 mm
  • Distance between the wall and the front of the radiator: 85 mm
  • Note: The towel radiator is heated with hot water, not electricity.
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. CAUTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.