Skip to product information
  • Vetonek Sillón de masaje reclinable con reposapiés cuero sintético gris

Reclining massage chair with gray synthetic leather rest

177,46 €
177,46 € 199,72 €
You save 11% (22,26 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Sit down and rest in this very comfortable reclining armchair! Vibration function: The 6 massage points will make you enjoy a better focused massage. In addition, the included command allows you to choose different massage programs. The massage function works through the USB connector that requires a Certified 5 V USB power supply (not included). Manual reclining function: The massage chair is specially designed with a reclining function so you can adjust the backing to Your taste. The support can be lean from 105 to 125 degrees. 360 degrees: the reclining chair of massage can turn 360 degrees, which gives it an extra flexibility. As a seat: the padded seat, the backing and the wide plans covered with synthetic leather They provide a comfortable and cozy feeling, so that you are wonderful while sitting. The additional stool is worth resting when lying on the reclining chair, which makes this armchair a comfortable seat for any occasion. Solid and stable structure: the structure, made of plywood and metal wood, provides a structure and a strong stability. This reclining chair is comfortable and durable. Useful information: To save space, some pieces or cushions are stored inside the furniture: Check the compartments with closure or under the seat cover to see if there are hidden components.

  • Gray
  • Material: Synthetic leather (75% polyvinyl chloride, 20% polyester, 5% cotton), plywood, metal
  • Fill material: foam
  • Requires assembly: Yes
  • Reclinable massage chair:
  • Sitting dimensions: 79 x 77.5 x 106 cm (wide x high x high)
  • Limited dimensions: 79 x 101 x 97 cm (wide x high x high)
  • Seat width: 50 cm
  • Seat depth: 55 cm
  • Height of the headquarters from the ground: 54.5 cm
  • Chair base diameter: 70 cm
  • Massage type: 6 -point vibration massage
  • Input voltage: 5 V CC
  • Input current: 2 A
  • Maximum load capacity: 110 kg
  • Footrest:
  • Seat dimensions: 49 x 31.5 x 37 cm (wide x high x high)
  • Diameter of the base of the rest: 50 cm
  • Delivery contains:
  • 1 x Massage reclining armchair
  • 1 x rest
Take into account the risk of open fire and other sources of intense heat in the vicinity of the product. Maximum 110 kg per seat. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.