Skip to product information
  • Vetonek Triciclo para niños rojo

Red children tricycle

90,42 €
90,42 € 101,76 €
You save 11% (11,34 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This tricycle for children is perfect for the little ones who want to walk with style and have fun outdoors! He is the perfect partner for children who want to take their first steps in the world of cycling! This tricycle has a 3 -wheeled design that is ideal for beginner cyclists who begin to learn to mount. It provides low impact exercise that allows them to have fun for hours and develop their motor skills in the process. The structure is robust but light, which also offers the durability necessary for uninterrupted conduction. In addition, the ergonomic seat prevents children from being backward when riding and allows them to travel more comfortably.

  • Red
  • Material: Plastic
  • Dimensions: 68.5 x 40.5 x 54 cm (length x width x high)
  • Maximum load capacity: 25 kg
  • Warning: Not suitable for children under 3 years.
  • Warning: Allowed for 1 user
  • Warning: This toy has no brake
  • Warning: Mandatory assembly by an adult
  • Warning: only for domestic use.
  • WARNING: It must be used under the direct supervision of an adult.
  • WARNING: Protection equipment should be used. Do not use in traffic.
Warning only for domestic use. Maximum user weight 25kgs. Not suitable for children under 3 years. Allowed 1 user. This toy has no brake. It requires the assembly of an adult. Warning! It should only be used under the supervision of an adult. Warning. Protection equipment should be used. Do not use it in traffic. It is recommended to use protection equipment. Do not use in traffic. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.