Skip to product information
  • Vetonek Red para contenedor de transporte HDPE negro 3,5x7 m

Network for Black HDPE transport container 3.5x7 m

74,91 €
74,91 € 84,31 €
You save 11% (9,40 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

If you are tired of the networks for poor quality containers that are tangled, our resistant network for containers is the ideal solution to prevent the loading of your container from falling during transport. Made of 100% HDPE (high density polyethylene), this durable network cover is resistant to UV rays and weathering. In addition, thanks to brass eyelets, the network can safely hold the container, keeping the load in place.

  • Color: black
  • Material: 100% HDPE (high density polyethylene)
  • Density: 160 g/m²
  • Dimensions: 3.5 x 7 m (width x long)
  • Fine mesh
  • With brass eyelets
  • Permeable to wind and water
  • Mold resistant and UV rays, breathable HDPE
  • Material: polyethylene: 100%
Attention! Use only to cover! The load height should not be higher than the container. Replacement criteria: The network is broken or has defects that may affect security. The manual must be delivered together with the network to the end user. The material to be transported must be loaded so that it is well fixed on the load surface and must be secured by means of the vehicle body. Next, the network to cover the trailer can be placed on the load surface so that it overlaps at the edges and no material can escape while the vehicle is moving and, therefore, possibly obstruct or endanger traffic that follows. The network to cover the trailer will be more effective when all meshes are tensioned uniformly and the network is connected to adequate clamping points on the open load surface or the container. Rinse the network with water. Networks must be controlled during use through visual inspection. Networks must be removed or changed when defects are detected. Repairs can only be made by the manufacturer or the person he has authorized. Evidence should be provided that you have the necessary knowledge and skills. After repair work, the original properties of the network must have been restored. In addition, networks must be inspected by a competent person at least once a year. This inspection must be documented. In case of doubt, the networks in question must be withdrawn from the service.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.