Skip to product information
  • RedFire Brasero canasta Denver acero 51,5x39x45 cm negra 85015

REDFIRE BRASERO BASKET DENVER STEEL 51.5x39X45 CM BLACK 85015

45,10 €
45,10 € 50,76 €
You save 11% (5,66 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

A classic brazier with an elegant finish and a modern touch, is the Redfire Denver Fire basket in a few words. With the style of a typical basket brazier, this product adds the warmth and the environment you are looking for. It is easy to move and the ignition plate also ensures that there is very little garbage on the floor of the patio or in the garden. This keeps everything ordered when the fire goes out. Thanks to the expanded opening, there is enough space to make a substantial fire with several large trunks so that you and your guests can enjoy all night. Thanks to the rack -shaped housing, good air circulation is created and the flames continue to dance and grow. The steel with powder coating gives the brazier an elegant appearance. To preserve that aspect as much as possible, we advise you to always keep the brazier Denver Seco, and keep it inside if possible. The delivery includes an easy -to -install fire basket and a plate to collect the ashes.

  • Color: black
  • Material: Steel
  • Dimensions: 51.5 x 39 x 45 cm (length x width x high)
  • Classic design
  • Delivery includes a chimney and an ash collecting dish
Important: carefully remove the packaging before using the product, but keep the safety instructions. These instructions are part of the product. Take into account all security warnings included in these instructions. Read these instructions in its entirety and keep them for future consultations. These instructions should be saved together with the product. This product is only for domestic use and should not be used for commercial or contractual purposes.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.