Skip to product information
  • RedFire Chimenea Kingston acero negro mate 160x60 cm

Redfire Kingston Chimney Matte black steel 160x60 cm

335,44 €
335,44 € 377,53 €
You save 11% (42,09 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Give your garden an additional touch with the great Kingston chimney of Redfire, in matte black! This garden fireplace measures 60 cm wide and emits heat on all sides through the conductive material. The fireplace with stainless steel finish extracts smoke and gives the fireplace a contemporary appearance. In addition, the Kingston model is equipped with a woodcut at the bottom. It is ideal to quickly dry the firewood and thus be able to use it later. The chimney is delivered with an attorney and a grid for the wood. Note: Do not leave the brazier unattended and do not allow children to touch or play with him.

  • Color: matt black
  • Material: Steel with protective coating
  • Dimensions: 60 x 160 cm (high diameter)
  • Steel thickness: 0.8 mm
  • Fireplace and wood 2 in 1
  • Great recharge opening
  • With a stable base
  • Chimney finish with stainless steel ring
  • Delivery includes: 1 x ATIZER, 1 X Grid
WARNING! Probable danger of death and risk of injuries! Use in closed spaces can be dangerous and prohibited. Read the manual before using the product. Note: Important! Carefully remove the packaging before using the product, but keep the security manual. These are part of the product. Take into account all the security warnings mentioned in this manual. Read the instructions in its entirety and keep them for future references. These must be stored together with the product. This product is for domestic use and cannot be used for commercial or contractual purposes.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.