Skip to product information
  • Vetonek Tableros de valla de repuesto 9 uds WPC marrón 170 cm

Replacement fence boards 9 UDS WPC Brown 170 cm

316,10 €
316,10 € 355,76 €
You save 11% (39,66 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our fence boards with termination bar are the substitute for our fence panel games (SKU 3053207-3053224, 3054430). Our set of square panels can be used as a garden or residential fence barrier for greater privacy and safety. These WPC boards have an impression of wooden veins on one side and a normal impression on the other side, so you can choose the design that you like best. Our wood and plastic compound fences do not require any additional treatment, such as varnish or paint. They are very durable and resistant to rot or oxide. Thanks to the upper aluminum profile, the boards can be fixed firmly with each other, which increases their rigidity and strength against the impact. Designed with the modular system, the fence boards allow you to expand the fence freely. The delivery includes 9 WPC tables and 1 termination bar. Keep in mind that these fence tables are the replacement of our fence panel games (SKU 3053207-3053224, 3054430) and we also offer replacement posts (SKU 49076-49077 and 148986-148987).

  • Color: Brown
  • Material: compound of wood and plastic + upper aluminum profile
  • Table size (each): 170 x 20.3 cm (long x width)
  • Table thickness: 2 cm
  • Final bar length: 170 cm
  • The delivery includes 9 fence boards and 1 aluminum final bar
  • Assembly time: approx. 0.5 hours

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.