Skip to product information
  • RIDDER Asiento de inodoro con barra de agarre blanco 150 kg A0072001

RIDDER Asiento de inodoro con barra de agarre blanco 150 kg A0072001

143,44 €
143,44 € 161,44 €
You save 11% (18,00 €)
Tax included. Shipping calculated at checkout.

Description

El asiento de inodoro con barras de agarre de seguridad de RIDDER facilita la tarea de sentarse y levantarse del inodoro a personas con movilidad reducida. El asiento de inodoro está hecho de plástico fácil de limpiar, respetuoso con la piel y sin bordes filosos. Tiene grandes recortes en la parte delantera y trasera para mejorar la higiene y eleva la altura de asiento con unos impresionantes 10 cm. Sus barras de agarre de seguridad robustas, hacen que sea más fácil y seguro de usar el inodoro y elimina la necesidad de poner barras de apoyo montadas en la pared. Este asiento de inodoro elevado tiene una capacidad de carga máxima de 150 kg y se adapta a cualquier decoración de baño gracias a su color blanco neutro.

  • Color: Blanco
  • Material: Plástico, aluminio, poliuretano (PU)
  • Dimensiones: 53,4 x 43,5 x 30 cm (longitud x anchura x altura)
  • Peso máximo del usuario: 150 kg
  • Levanta la altura de asiento en 10 cm
  • Altura de la barra de agarre: Aproximadamente 30 cm
  • Encaja en todos los inodoros estándar

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.