Skip to product information
  • RIDDER Alfombra de baño Grating Nature de madera 72x38 cm

RIDDER BATHROOM PARK GRAN NATURE OF WOOD 72x38 cm

65,63 €
65,63 € 73,87 €
You save 11% (8,24 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The wooden bathroom carpet Ridder's Grating Nature model will be a perfect contribution to its bathroom, kitchen or corridor. This 100% natural bathroom carpet is made of bamboo and has a warm neutral color. The carpet is suitable for all types of soil, even for radiant soils. The surface is varnished, is stable to UV radiation and is very hard and scratch resistant. Unlike the currents fabric bath carpets, this carpet does not retain water and it is not recommended to leave it exposed to permanent humidity. In addition, this bathroom carpet is non -slip and easy to save and keep clean.

  • Color: natural
  • Material: 100% bamboo
  • Dimensions: 72 x 38 x 3 cm (length x width x thickness)
  • Water stripe width: 55 mm
  • Cover with stable varnish before UV radiation
  • Environmentally neutral colors
  • It does not absorb water
  • Hard and scratch resistant surface
  • Made with sustainable, unstressed and renewable material quickly
  • Non -slip
  • Easy to clean
  • Suitable for radiant soils
  • It cannot be exposed to permanent moisture
  • Suitable to place in the kitchen, living room or hallway
  • Do not place inside the bathtub or shower

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.