Skip to product information
  • RIDDER Cortina de ducha Funanas 180x200 cm

Ridder shower curtain funanas 180x200 cm

38,30 €
38,30 € 43,11 €
You save 11% (4,81 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Nice and functional in equal parts, this shower curtain, Ridder Funanas model, helps to create a pleasant atmosphere in the bathroom thanks to its beautiful print of durable colors. This bath curtain is made 100% polyester, impregnated and covered, which makes it water resistant and is very practical to use. An elastic rubber band is sewn in the lower hem, which guarantees that the shower curtain has a good fall in order to offer a more pleasant shower experience. The curtain can be washed by machine up to 30 ° C and can be ironed at low temperatures. The installation is very easy: the shower curtain is equipped with plastic eyelets and can be hung easily and practical with shower curtain rings (not included). Let Ridder's quality convince you!

  • Color: Multicolor
  • Material: 100% polyester
  • Dimensions: 180 x 200 cm (high x width)
  • Impregnated and with coating
  • Water resistant
  • Digital print and high color stability
  • High abrasion resistance
  • It can be ironed at low temperature
  • Hells on its four sides
  • Lower hem with weight
  • Plastic eyelets for shower rings (not included)
  • Washable in the washing machine up to 30 ºC
  • Do not use bleach, dry in dryer or dry washing
  • Material: Polyester: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.