Skip to product information
  • RIDDER Taburete de baño Zac XXL negro PU/aluminio

RIDDER BATH TABUETE XXL BLACK PU/ALUMINUM

111,81 €
111,81 € 125,84 €
You save 11% (14,03 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Sit down, feel good and relax in the most pleasant way with this Ridder Zac XXL bathroom stool. Robust material: The stool has a robust and oxide resistant aluminum frame and a maximum load capacity of 150 kg. Practical design: This shower seat is equipped with drainage openings, which guarantees a quick drying in the seat. Insurance: The shower stool has been tested by Tüv / LGA in terms of safety and absence of harmful substances to guarantee young people and older a safe and comfortable daily experience in the bathroom. Additionally, the bathroom has non -slip profiles, ensuring a safe and relaxed stay in your bathroom. Important note: For your safety and to avoid injuries, do not balance with the bath stool or move it while sitting on it, since the legs can be fold or break.

  • Color: black
  • Material: polyurethane foam, aluminum
  • Dimensions: 61.2 x 56.5 x 39.1 cm (length x width x high)
  • Seat dimensions: approx. 50 x 39.5 cm
  • Total dimensions: approx. 56.5 x 39.5 x 59 cm
  • Seat height: approx. 49.5 cm
  • Seat thickness: about 3.7 cm
  • You can load up to a maximum of 150 kg
  • With non -slip profiles
  • Drainage openings in the seat for a quick drying of the seat
  • With plags to get up more easily
  • It can be cleaned with cleaning agents and commercially available disinfectants

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.