Skip to product information
  • Vetonek Mesa de centro madera de mango rugosa y caña natural 90x50x35cm

RUGOSE MANGO WOOD AND NATURAL CAÑA CENTER TABLE 90x50X35CM

201,49 €
201,49 € 226,77 €
You save 11% (25,28 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This rough manging wooden center table is ideal if you are looking to add a rustic style to the current decoration of your home. The solid mango wood is a tropical hard wood. On the one hand, it has strength to support weight and, on the other hand, it is resistant to time wear. In addition, the exquisite craft and the beautiful veins of the wood make each sofa table slightly different from the next. The auxiliary table is equipped with ample storage space, so you can exhibit or keep the elements you want well organized. The iron structure contributes to its robustness and stability. In addition, the auxiliary table presents a hand -failed cane pattern at the door, which brings its rustic charm. Important note: The colors vary from one piece to another, which makes each wooden lounge table unique.

  • Material: rough mango wood with natural finish, natural cane, iron with black dust coating finish
  • Dimensions: 90 x 50 x 35 cm (wide x high x high)
  • Required assembly: no

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.