Skip to product information
  • Vetonek Alfombra autoadhesiva escalera sisal 15 uds antracita 65x21x4cm

Self -adhesive carpet Sisal 15 UDS Anthracite 65x21x4cm

116,74 €
116,74 € 131,38 €
You save 11% (14,64 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These stairs carpets will not only be a striking decorative complement for the decoration of your home, but will also protect you from the slippery when you upload and lower the stairs and prevent them from being scant. These carpets are made of strong fabric with an appearance of Sisal, so they cushion the sound, they are non -slip, warm and comfortable. These stairs carpets are also washable and fold to protect both the top and front of the stairs. Adhesive tapes at the rear allow these carpets to be fixed to the stairs easily and quickly.

  • Color: Anthracite gray
  • Material: fabric (89% polypropylene, 5% polyester, 6% cotton)
  • Dimensions: 65 x 21 x 4 cm (length x width x high)
  • Total height: 5.3 mm
  • Hair weight: 640 g/m²
  • With self -adhesive tapes
  • SISAL appearance
  • Delivery contains:
  • 15 x stairs carpets

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.