Skip to product information
  • Vetonek Set de herramientas para instalar y remover el cigüeñal y su sello

Set de herramientas para instalar y remover el cigüeñal y su sello

98,07 €
98,07 € 98,07 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este set de herramientas de calidad profesional está diseñado para cigüeñales y sellos de cigüeñales. Este set completo es ideal para remover e instalar rápida y fácilmente los sellos de los cigüeñales. Incluye dos removedores de distintos tamaños y longitudes, para acomodar así un amplio rango de aplicaciones. Su removedor de cuchilla curva es ideal para remover sellos en espacios pequeños. Las herramientas están fabricadas con materiales de alta calidad y son muy duraderas. Tiene un estuche moldeado por soplado para facilitar su transporte y almacenamiento.

  • Tamaño del kit: 45 x 37 x 9 cm (Largo x Ancho x Alto)
  • Material de las herramientas: acero de carbono
  • Ideal para cigüeñales y sellos de cigüeñales
  • Para remover o instalar de forma rápida y fácil
  • Tiene dos removedores de sellos con tamaños y longitudes distintas
  • La cuchilla curva es ideal para remover los sellos en espacios limitados.
  • Construcción duradera
  • Con estuche moldeado por soplado para facilitar transporte y almacenamiento.
  • Kit universal que incluye una variedad de tamaños de instaladores de sellos.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.