Skip to product information
  • Vetonek Set de mesa y taburetes altos jardín 7 piezas madera pino gris

Set de mesa y taburetes altos jardín 7 piezas madera pino gris

444,60 €
444,60 € 444,60 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Toma un sorbo de tu bebida favorita o disfruta de una buena comida con la familia y los amigos alrededor de este juego de mesa y taburetes altos de madera! Madera maciza de pino: Este juego de mesa y taburetes altos está hecho de madera maciza de pino. La madera maciza de pino es un bonito material natural. La madera de pino tiene vetas rectas, y los nudos dan al material su distintivo aspecto rústico.Superficie resistente: La mesa alta de estos muebles de bar tiene una superficie resistente, perfecta para colocar bebidas, comida y artículos decorativos.Asiento cómodo: El taburete de bar de madera está diseñado con un respaldo y un reposapiés incorporado para ofrecerte una experiencia de asiento cómoda.Amplios usos: Con un diseño minimalista, el juego de muebles altos para jardín encaja en cualquier rincón del jardín, patio, balcón, la terraza, etc. Nota:Para asegurarte de que tus muebles de exterior se mantengan hermosos, recomendamos protegerlos con una funda impermeable.

  • Color: Gris
  • Material: Madera de pino maciza
  • Dimensiones de la mesa alta: 159,5 x 82,5 x 110 cm (ancho x profundo x alto)
  • Dimensiones de taburete alto (cada uno): 40 x 41,5 x 112 cm (largo x ancho x alto)
  • Máx. capacidad de carga (por asiento): 110 kg
  • Requiere montaje: Sí
  • La entrega incluye:
  • 1 x Mesa de bar
  • 6 x Taburetes de bar
Máximo 110 kg por asiento.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.