Skip to product information
  • Vetonek Set de sofás de jardín 7 piezas y cojines ratán sintético negro

Set de sofás de jardín 7 piezas y cojines ratán sintético negro

689,09 €
689,09 € 775,55 €
You save 11% (86,46 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Crea un área de descanso relajante con este juego de muebles de jardín de ratán sintético. Este cómodo set de muebles de jardín, con una estructura de acero con recubrimiento en polvo cubierta con ratán PE, es resistente y fácil de limpiar. La superficie con un diseño de listones está hecha de madera maciza de acacia, que aporta un plus de elegancia y solidez. Los sofás forman un abanico, por lo que es una decoración perfecta para el espacio al aire libre de tu casa. Además, los cojines acolchados de asiento y de respaldo brindan el confort definitivo al sentarte. Gracias a a la construcción ligera, este juego de muebles de exterior se puede mover fácilmente. Nota importante: Recomendamos cubrir el set de salón en condiciones de lluvia, nieve y heladas para que sea más duradero.

  • Mesa:
  • Color: Negro y marrón
  • Material: Ratán PE (polietileno), acero con recubrimiento en polvo, madera maciza de acacia
  • Dimensiones: 70 x 73 cm (diámetro x alto)
  • Sofá:
  • Color: Negro
  • Color de los cojines: Blanco crema
  • Material: Ratán PE, acero con recubrimiento en polvo, tela (100% poliéster)
  • Dimensiones: 88 x 66 x 67 cm (ancho x profundo x alto)
  • Altura del asiento desde el suelo: 39 cm
  • Grosor del cojín del asiento: 5 cm
  • Diseño en forma de abanico
  • Incluye patas ajustables para adaptarse a terrenos irregulares
  • Requiere montaje: Sí
  • La entrega incluye:
  • 1 x Mesa
  • 6 x Sofás
  • 6 x Cojines de asiento
  • 12 x Cojines de respaldo

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.