Skip to product information
  • Vetonek Sillones de jardín Adirondack 2 uds madera maciza de abeto

Sillones de jardín Adirondack 2 uds madera maciza de abeto

276,34 €
276,34 € 311,01 €
You save 11% (34,67 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Estas sillas de jardín Adirondack son perfectas para aquellos que quieren disfrutar del aire libre con estilo y comodidad. Madera maciza de abeto: La madera maciza de abeto es un material bonito y duradero que mantiene su integridad incluso cuando se expone a la humedad. No se seca ni se deforma, lo que la convierte en una opción fiable.Asiento cómodo: El sillón de jardín cuenta con un asiento ergonómico y un respaldo en ángulo para una comodidad óptima al sentarse. Además, los reposabrazos en forma de rueda de carreta proporcionan un espacio cómodo para descansar los brazos.Amplios usos: La silla de jardín es una solución perfecta para sentarse en el jardín, patio, césped, terrazas, al lado de piscinas, balcones y otros espacios al aire libre. Información útil:Para asegurarte de que tus muebles de exterior se mantengan hermosos, recomendamos protegerlos con una funda impermeable.

  • Material: Madera maciza de abeto con aspecto quemado
  • Dimensiones: 63 x 62 x 99 cm (ancho x profundo x alto)
  • Anchura del asiento: 54 cm
  • Profundidad del asiento: 44 cm
  • Altura del asiento desde el suelo: 40,5 cm
  • Altura del reposabrazos desde el suelo: 56,5 cm
  • Capacidad máxima de carga: 110 kg
  • Requiere montaje: Sí
  • La entrega contiene:
  • 2 x Sillas de jardín Adirondack.
Máximo 110 kg por asiento.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.