Skip to product information
  • Vetonek Skimmer de superficie de piscina Flowclear 58233

Skimmer Surface Surface Flowclear 58233

36,77 €
36,77 € 41,38 €
You save 11% (4,61 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Vetonek 58233 pool surface skimmer provides a very effective way to clean the waste from high pools. The pool skimmer hooks on the inner wall of the high pool and is easy to use. Simply connect it to the filter pump and start accumulating waste automatically. Empty the skimmer when it is filled. Adjustable assembly support allows you to move up or down, so that it is aligned with the surface of the water. Because the pool skimmer is made of corrosion -resistant plastic, it is durable and easy to maintain. Note: The pool and filter pump are not included. The product is only suitable for high pools, except for pools with steel walls.

  • Material: Durable and corrosion resistant plastic
  • It can be mounted on the pool wall to aspire floating leaves or other dirt
  • It can be attached to the filtration pump for automatic cleaning
  • Easy to clean
  • It adapts to filtration pumps with a 2006 l/h flow ((530 Gal USA
  • Vetonek article number: 58233
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.