Skip to product information
  • Vetonek Portería de fútbol con reboteador 2 en 1 acero 202x104x120 cm

Soccer goal with bouncer 2 in 1 steel 202x104x120 cm

91,49 €
91,49 € 102,97 €
You save 11% (11,48 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

If you like the pretty game, you will surely love this football rebound network. Easy to mount, this portable football goal comes with a robust steel structure and a quality polyester network to practice your football skills. Pass, receive, direct, catch, write down and chutar are mixed with reactive skills to deal with unpredictable bounces of the ball. In this soccer training network you can bounce the ball with precision. The low surface network helps to train the ball pass. The high surface helps to train high balls and improve the effectiveness of training and effect. From the goalkeeper to the side or the striker, all football positions can be trained and rigorously tested in real game conditions. In addition, the four earth plugs guarantee that the whole set is firmly maintained in place even with an intense game. You can easily take the goal anywhere to take a game with the additional transport bag.

  • Color: black
  • Structure material: steel, fiberglass
  • Network material: polyester
  • Total dimensions: 202 x 104 x 120 cm (wide x high x high)
  • Mesh dimensions: 4.5x4.5 cm (long x width)
  • Outdoors
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x football rebounder
  • 1 x Oxford Transport Bag
  • 4 x piquetas

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.