Skip to product information
  • Soehnle Báscula de baño Style Sense Comfort 100 180 kg blanca 63853

Soehnle Style Comfort 100 180 kg Blanca 63853 bathroom

38,35 €
38,35 € 43,16 €
You save 11% (4,81 €)
Tax included. Shipping calculated at checkout.

Description

With its elegant blank design, the Sense Comfort 100 of Soehnle will add a touch of style to any bathroom. The scale is not only attractive, but very practical. The large weighing platform is made of high quality and extra strong safety glass. The scale has a large load capacity of up to 180 kg/ 396 lb and weight measurement is shown in precise increases of 100 g/ 0.2 lb on the easy -to -read LCD screen. The scale turns on immediately when steps on it and goes out automatically after weighing. Safety glass and battery safety compartment for children with screws highlight the high level of the scale. 1 CR2032 battery is included in delivery.

  • Color: White
  • Material: Safety and plastic glass
  • Dimensions: 31 x 31 x 2 cm (length x width x high)
  • Easy to read LCD with large digits
  • Extra fine design
  • With a large weighing platform
  • Automatic ignition/off function
  • Non -slip legs
  • With a battery compartment with safety closure for children with screws
  • Easy to select units in Kg, LB and ST
  • Maximum load capacity: 180 kg/396 lb (in increases of 100 g/0.2 lb)
  • 1 x CR2430 battery included
To obtain the best isolation performance: - Preheat with hot water for approximately 2 minutes before filling with hot drinks - pre -hut with cold water for approximately 2 minutes before filling with cold drinks do not use to keep hot dairy products or baby foods ( bacterial growth risk). Do not use sharp, abrasive objects, solvents or bleaching agents to clean!

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.