Skip to product information
  • Vetonek Sofá cama con colchón madera de pino maciza blanco 90x200 cm

Sofá cama con colchón madera de pino maciza blanco 90x200 cm

281,63 €
281,63 € 281,63 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este sofá cama de madera es una solución perfecta para alojar a los huéspedes durante la noche, al tiempo que ofrece un cómodo espacio para sentarse durante el día. El sofá cama está hecho de madera de pino maciza, por lo que es resistente y estable. Los robustos listones también ofrecen el soporte y la comodidad necesarias. ¡Siempre puedes disfrutar de una buena noche de sueño en la cama con un colchón extrasuave! Ofrece una experiencia de sueño tranquila y también protege la salud de la columna vertebral. Recomendamos ventilar el colchón regularmente para prolongar su vida útil. Esta cama de día de madera multifuncional puede utilizarse como sofá durante el día, o como cama por la noche para ofrecer una solución rápida para alojar a los invitados que pasen la noche. ¡Este práctico sofá cama es definitivamente un atractivo dondequiera que se coloque! Nota importante: No puedes devolver el colchón por razones de higiene si la funda del colchón ha sido abierta o retirada.

  • Color del sofá cama: Blanco
  • Color del colchón: Blanco
  • Material: Madera de pino maciza (sin tratar), espuma PU D25
  • Material de la funda del colchón: 100 % poliéster
  • Dimensiones del sofá cama: 204 x 98 x 70 cm (ancho x profundo x alto)
  • Dimensiones del colchón: 90 x 200 x 16 cm (ancho x profundo x grosor)
  • Grosor de la espuma: 14 cm
  • Altura de la cama desde el suelo: 21 cm
  • Con dureza H2/H3
  • Con fundas lavables
  • Con cremallera de 4 lados
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Sofá
  • 1 x Colchón

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.