Skip to product information
  • Vetonek Gallinero madera maciza pino y abeto 126x117x125 cm

Solid and fir wood gallinero 126x117x125 cm

263,15 €
263,15 € 296,17 €
You save 11% (33,02 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This high quality shelter offers a comfortable and pleasant space to store small animals; Above all, chickens. The chicken coop has a high quality wood structure, so it will last years. The construction of Iron Metal Mesh guarantees that you can monitor chickens and that they can receive enough fresh air. You can take fresh eggs without problems just by opening the upper panel of the side cage. The cage is a certain distance from the ground to protect pets from cold and humidity. The green roof keeps the rain out of the chicken coop and the cubicle offers a perfect sleeping area. An easily accessible ramp drives from the ground to the cage. This chickens wooden cage is easy to assemble.

  • Color: Brown and Green
  • Total dimensions: 126 x 117 x 125 cm (long x high x high)
  • Interior dimensions: 92 x 92 x 90 cm (long x high x high)
  • Box dimensions for eggs: 39.5 x 36 x 33 cm (long x high x high)
  • Material: Sounded pine / fir wood structure, Iron metal mesh with powder coating, plywood wood
  • Covered roof with water resistant fabric (100% polyester)
  • With 2 windows
  • With a ramp to facilitate access
  • Outdoors
  • Suitable for chickens

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.