Skip to product information
  • Vetonek Sombrilla de jardín con palo de aluminio tape 180x110 cm

Sombrilla de jardín con palo de aluminio tape 180x110 cm

48,45 €
48,45 € 54,53 €
You save 11% (6,08 €)
Tax included. Shipping calculated at checkout.

Description

Esta sombrilla de jardín es perfecta para crear sombra y protegerse de los dañinos rayos UV del sol. La cubierta de la sombrilla, hecha de poliéster protector contra rayos ultravioleta y que no se destiñe, brinda una protección óptima contra el sol y es fácil de limpiar. Los fuertes postes de aluminio hacen que la sombrilla sea muy estable y duradera. La sombrilla de jardín puede girar 180 grados para que puedas ajustar el ángulo de la sombrilla fácilmente con el fin de seguir el movimiento del sol. El artículo es fácil de montar. Ten en cuenta que recomendamos tratar la tela de la sombrilla con un aerosol impermeabilizante si se ve sometida a fuertes lluvias.

  • Color: Gris taupe
  • Material: Tela (100% poliéster), aluminio
  • Dimensiones totales: 180 x 110 x 208 cm (largo x ancho x alto)
  • Diámetro del palo inferior: 22 mm
  • Diámetro del palo central: 22 mm
  • Diámetro del palo superior: 22 mm
  • Altura ajustable
  • Gira 180 grados
  • Requiere montaje: Sí
El producto no es adecuado para condiciones climáticas como vientos fuertes, nevadas y condiciones climáticas extremas.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.