Sombrilla de jardín con palo de madera azul 350 cm

123,09 €
123,09 € 138,53 €
You save 11% (15,44 €)
Tax included. Shipping calculated at checkout.

Description

Esta práctica sombrilla es una elección perfecta para crear un poco de sombra y protegerse de los nocivos rayos UV del sol. La cubierta de sombrilla, hecha con protección contra rayos ultravioleta y poliéster que no se destiñe, brinda una protección óptima contra el sol y es fácil de limpiar. Con un palo con diámetro de 48 mm, se puede montar en el soporte existente o en el medio de mesas con agujero. El palo de madera fuerte, junto con las varillas, hace que la sombrilla sea muy estable y duradera. La sombrilla del jardín puede abrirse y cerrarse fácilmente gracias al doble mecanismo de polea. El artículo es fácil de montar. Ten en cuenta que recomendamos tratar la tela de la sombrilla con un aerosol impermeabilizante si se ve sometida a fuertes lluvias.

  • Color de la cubierta: Azul
  • Estructura material: Bambú laminado y madera dura.
  • Material de la cubierta: Tela (100% poliéster)
  • Dimensiones totales: 350 x 240 cm (diámetro x altura)
  • Diámetro del poste: 48 mm
  • Con ventilación y sistema doble de polea
El producto no es adecuado para condiciones climáticas como vientos fuertes, nevadas y condiciones climáticas extremas.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.