Skip to product information
  • Vetonek Sombrilla de pared con barra de metal taupe 300 cm

Wall umbrella with taupe metal bar 300 cm

110,74 €
110,74 € 124,63 €
You save 11% (13,89 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant wall umbrella is the perfect choice to create some shade and serve as a parasol to protect itself from the harmful UVA of the Sun. Made of polyester with protection against ultraviolet rays that does not fade, the umbrella cover provides optimal protection against the sun and is easy to clean. The exclusive design of this umbrella allows you to bow the umbrella to block the sun by directing it towards the horizon. The strong steel post, along with the 8 robust rods, make the umbrella very stable and lasting. The garden umbrella opens and closes easily thanks to the crank mechanism. The article is easy to assemble. Delivery also includes assembly accessories. Keep in mind that we recommend treating the umbrella fabric with a waterproofing spray if it is subject to heavy rains. The height of this wall umbrella depends on the height at which it is mounted on the wall.

  • Color: Taupe Gray
  • Material: fabric + metal
  • Total dimensions: 300 x 131 cm (high diameter x)
  • Post diameter: 48 mm
  • With the crank system
  • Includes 8 rods
  • Delivery includes the wall assembly accessory
  • Material: Polyester: 100%
The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.