Sounded wooden table of brown pine honey 60x50x35 cm

72,98 €
72,98 € 82,13 €
You save 11% (9,15 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

It gives a touch of elegance to the house with this stylish wooden center table. Solid pine wood: solid pine wood is a beautiful natural material. Pine wood has straight veins, and knots give the material their distinctive rustic appearance. Elevable board design: this auxiliary table is designed with an elevable board, which can be easily adjusted to adequate and comfortable height to use a laptop , Write or dinner while sitting on the couch. Amplio Storage space: This sofa table has a large hidden compartment under the surface to store your daily use objects, protect them from dust and keep the house well organized. Robust structure: the Wood structure of the lounge table guarantees robustness and stability. Note: The waterproof canvas is not included product comes with a assembly manual in the box to facilitate assembly.

  • Color: Honey brown
  • Material: solid pine wood
  • Dimensions: 60 x 50 x 35 cm (length x width x high)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.