Skip to product information
  • Vetonek Tela de repuesto para toldo amarillo y blanco 4,5x3,5 m

Spare fabric for yellow and white awning 4.5x3.5 m

74,72 €
74,72 € 84,10 €
You save 11% (9,38 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This spare fabric is perfect to renew the old and worn upper part of the awning or to save it as a replacement. It can also be mounted on your awning structure, so it is a perfect choice to achieve a fresh and pleasant shadow in the patio, the terrace or the garden. With an attractive color, the awning fabric is intended to be an ideal contribution to your garden. Made of polyester resistant to UV and anti -dolus rays, this patio awning is very durable. Thanks to the slight design, it is also easy to carry. Note: This garden awning consists of 1 main fabric and 1 steering wheel. Delivery does not include the structure. It is a quality spare for people who already have the structure.

  • Color: yellow and white
  • Material: 100% polyester with PU coating
  • Real awning fabric dimensions: 430 x 345 cm (long x width)
  • Adequate structure dimensions: 4.5 x 3.5 m (length x wide)
  • UV resistant, weather resistant
  • Waterproof
  • Repeals dirt and dust
  • The structure is not included
  • Delivery includes:
  • 1 x main cloth awning
  • 1 x steering wheel
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. CAUTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.