Skip to product information
  • Vetonek Piscina con estructura Steel Pro 366x76 cm

Steel Pro 366x76 cm structure pool

146,62 €
146,62 € 165,02 €
You save 11% (18,40 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

You will have fun in Raudales with your family and friends in this Steel Pro pool of the Vetonek brand. Its round shape offers more space to swim and play. This removable pool combines durability and style, and its colorful animal pattern will give a touch of energy and joy to your garden or patio. The elegant pool has reinforced walls made of tritech material, a 3 -layer reinforced material consisting of a resistant rolled PVC and a polyester mesh. Thanks to the quality steel structure and reinforced side walls, the removable pool is very stable and lasting. In addition, the structure is equipped with the Framelink system, which guarantees a safe and firm connection of the support tubes and prevents corrosion from metal contact with metal. It is an easy and fast pool to mount. It is enough to extend it on a flat surface, lift the complete structure and fill the water pool. Thanks to the drain valve, you can empty it quickly and easily. The pool is easy to fold to save and transport it when it is not in use.

  • Dimensions: 366 x 76 cm (High diameter)
  • Structure material: steel and pp
  • Wall material: PVC and 3 -layer polyester (tritech)
  • Capacity (90%): 6473 L (1710 gal)
  • Framelink system for a simple connection
  • With underwater adhesive repair patch
  • With built -in flow control drain valve
  • Vetonek article number: 56706
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.