Skip to product information
  • Vetonek Soporte para carteles A1 base de agua aleación aluminio negro

Support for posters A1 Water base aluminum aluminum

227,50 €
227,50 € 256,05 €
You save 11% (28,55 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

If you are looking for an advertising support to announce or promote your products or services, our support for posters with a basis of water will be of great help! Its structure made of aluminum is lasting and light. The high -resistance plastic base can be filled with water or sand to create a stable and weight base, and spring design guarantees that your sign resists the strongest winds. Your posters will remain completely protected behind the galvanized sheet on each side of the sign, which will keep your posters in optimal conditions. The PVC film on both sides protects from dirt and is easy to maintain. In addition, the click system helps to install and quickly remove the poster. This water -based poster support is easy to assemble.

  • Color: black
  • Material: Aluminum alloy, PVC film, HDPE
  • Total dimensions: 78 x 48 x 113 cm (length x width x high)
  • Base dimensions: 78 x 48 x 16 cm (length x width x high)
  • Dimensions of the external frame: 63.4 x 88.1 cm (length x wide)
  • Visible area: 57.4 x 82.1 cm (length x wide)
  • Double face for 360 degree visualization
  • The dock design makes the wind bursts be doubled and resist
  • 2 x galvanized protective sheets included
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.