Skip to product information
  • Vetonek Tablero mesa madera tratada borde vivo marrón 200x60x(2-6) cm

Tablero mesa madera tratada borde vivo marrón 200x60x(2-6) cm

147,18 €
147,18 € 165,65 €
You save 11% (18,47 €)
Tax included. Shipping calculated at checkout.

Description

Dale una nueva vida a tu mesa con esta superficie de mesa de madera. Es una excelente solución para renovar tu mesa en casa o en un local comercial. Construcción duradera: El tablero de la mesa es de madera maciza de roble, un hermoso material natural. La madera de roble tiene un color marrón medio y unas vetas densas, que refuerzan su aspecto único. Gracias al diseño con bisagras, se puede plegar y guardar en espacios estrechos.Diversos usos: El tablero de repuesto se puede combinar con diferentes bases según tus necesidades.Superficie tratada: El tablero de recambio se ha tratado con pintura oscura, por lo que está listo para usar, ya que no necesita un acabado adicional.Hecho a mano con borde natuaral: El tablero DIY está meticulosamente hecho a mano, mostrando un borde vivo que le aporta un encanto natural. Por eso los nudos, las grietas, las formas ligeramente curvas y los tonos de color son parte de la madera de roble. Cada pieza tiene su propio carácter único para mostrar. La entrega es aleatoria, asegurando la exclusividad e individualidad del producto. Información útil:Al ser un producto natural, la madera puede presentar nudos e imperfecciones que rellenamos con rellenos para garantizar un aspecto liso.

  • Color: Marrón oscuro
  • Material: Madera maciza de roble con acabado oscuro
  • Dimensiones totales: 200 x 60 x (2-6) cm (largo x ancho x grosor)
  • Capacidad máx. con soporte de base: 48 kg
  • Cuenta con 2 bordes naturales laterales largos.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.