Skip to product information
  • Vetonek Taburete de cuero de cabra auténtico 40x30x45 cm

Taburete de cuero de cabra auténtico 40x30x45 cm

144,16 €
144,16 € 144,16 €
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este elegante y robusto taburete está tapizado en cuero de cabra auténtico con aspecto de cuero vacuno y será un complemento perfecto para cualquier hogar gracias a su icónico diseño. Quedará genial no sólo en restaurantes o bares, sino también en tu recibidor, salón o comedor de casa. El diseño de este taburete de estilo vintage se inspira en un caballo de pomo de la vieja escuela. El asiento está totalmente tapizado en cuero de cabra, que es cómodo, duradero y fácil de limpiar. Las patas de madera pulida, pintada y lacada son robustas y contribuyen al estilo retro del taburete. El montaje es fácil. Nota importante: Los patrones de cuero pueden variar de una pieza a otra, por lo que cada uno de nuestros taburetes sea único. La entrega es aleatoria, lo que garantiza la exclusividad e individualidad del producto.

  • Color: Multicolor
  • Material: Cuero de cabra auténtico (peludo) + patas de madera maciza de mango
  • Dimensiones: 40 x 30 x 45 cm (largo x ancho x alto)
  • Pulida, pintada y lacada
  • Fácil de montar
  • Material: Cuero: 100%
Máximo 110 kg por asiento. Tenga en cuenta el riesgo de incendios abiertos y otras fuentes de calor intenso en las proximidades del producto.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.