Skip to product information
  • Vetonek Taburetes de cocina 2 unidades tela verde

Taburetes de cocina 2 unidades tela verde

181,97 €
181,97 € 204,80 €
You save 11% (22,83 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Nuestro juego de taburetes de cocina de tela es ideal para disfrutar de una copa de vino o tomar un tentempié en la barra, o para usarlo como asientos adicionales si tienes invitados. Su diseño moderno y sencillo será un gran complemento para cualquier decoración interior. Este juego de sillas de cocina tienen una estructura de acero cromado que las hace muy estables y duraderas. Los asientos y respaldos acolchados con espuma blanda junto con los reposapiés hacen de este juego de taburetes el lugar perfecto donde relajarse. Gracias al mecanismo de elevación por gas, se puede ajustar la altura de estos taburetes de barra. También pueden girarse 360 grados, lo que ofrece una gran flexibilidad. Las sillas son fáciles de montar. La entrega incluye 2 taburetes de cocina.

  • Color: Verde
  • Material: Estructura de acero cromado + tapizado de tela
  • Dimensiones totales: 53 x 52 x (92-112) cm (ancho x profundo x alto)
  • Anchura del asiento: 43 cm
  • Profundidad del asiento: 37,5 cm
  • Altura del asiento desde el suelo: 63-83 cm
  • Altura del respaldo desde el asiento: 31 cm
  • Diámetro de la base: 41,5 cm
  • Mecanismo de elevación de gas
  • Rotación de 360 grados
  • La entrega incluye 2 sillas de cocina
  • Material: Algodón: 90%, Poliéster: 10%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.