Skip to product information
  • Tiger Impuls toallero de gancho de metal 4,8x5,5 cm (Color Cromo)

Tiger Import Metal Hook Roof 4.8x5.5 cm (Chrome color)

23,50 €
23,50 € 26,45 €
You save 11% (2,95 €)
Tax included. Shipping calculated at checkout.

Description

This modern big hook towel to mount on the wall of the Tiger Impuls collection will be a practical and perfect addition to any bathroom, kitchen or house door. The Tiger Promotive hook towelter has a luxurious chrome finish and can be mounted on different surfaces, using the assembly materials included in the delivery. The hook towelter is suitable for hanging loads up to 5 kg. The impulse hook is also compatible with the Tigerfix 1 assembly system, with which accessories can easily be fixed to a smooth and hard surface with a patented glue system. With this system, it is not necessary to drill and accessories can be easily removed. Keep in mind that Tigerfix 1 is sold separately, but you can find this product in our online store (SKU: 406611).

  • Color: Chrome
  • Material: Metal
  • Size: 4.8 x 5.5 x 7.4 cm (width x depth x height)
  • Weight: 0.17 kg
  • Suitable for up to 5 kg loads
  • Suitable for use in wet areas
  • Easy to install and clean
  • Invisible assembly system: assembly accessories are not visible after installation
  • Delivery includes stainless steel screws and expansion plugs

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.