Tipi family store for 8 orange gray waterproof

96,62 €
96,62 € 108,75 €
You save 11% (12,13 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This family store, with a modern aspect, protects you from the inclement weather, and provides you with a cozy place for your adventures anywhere. Integral Waterproof Design: This tent, made of polyester with PU coating, is waterproof and wind resistant. Sealing seams effectively avoid the entry of rainwater, while the canvas of resistant soil helps keep the interior dry and comfortable. It convenient to the electrical cable: the E-Port allows you to easily connect an extension cable of a source of a source of a source of a source of a source of a source of a source of a Food external to your store. Fácil Access: The zipper door allows easy access. You can roll it and secure it with the door of the door. In addition, it favors air circulation and provides abundant natural light. Good ventilation: This tent has an air exit to maintain a fresh and cool interior. LIGERA AND PORTIL: The folding and light design allows you to easily pack the store and Save it in the transport bag included to facilitate transport. WARNING: Keep all the flames and heat sources away from the fabric of this product.

  • Color: gray and orange
  • Material: Polyester 185t with PU coating
  • Store dimensions: 400 x 400 x 200 cm (length x width x high)
  • Packaging dimensions: 56 x 16 x 16 cm (length x width x high)
  • Sleeping ability: 8 people
  • Type of store: family store, tent, tipi store
  • Weight: 4.2 kg
  • Form: Tipi
  • Number of bedrooms: 1
  • Door number: 1
  • Number of air outlets: 2
  • With double zip access
  • With E-Port
  • With 2 storage pockets
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x store
  • 1 x transport bag
WARNING maintain all the flames and heat sources away from the fabric of this product. The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.