Skip to product information
  • Vetonek Toldo manual retráctil 100 cm azul y blanco a rayas

Toldo manual retráctil 100 cm azul y blanco a rayas

77,34 €
77,34 € 87,05 €
You save 11% (9,71 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este toldo retráctil será ideal para usar frente a la ventana, en la terraza, el balcón o en tu jardín. Este toldo repelente al agua y a la suciedad y resistente a los rayos UV y a la intemperie está hecho de poliéster de calidad con un revestimiento de PU. La fuerte estructura de acero hace al toldo robusto y duradero. El toldo de poliéster fácil de limpiar se puede quitar y lavar. Gracias a la manivela, este toldo es retráctil. La altura y el ángulo del toldo también se pueden ajustar. Es fácil de montar. Este toldo es una opción perfecta para el espacio al aire libre de tu casa y se puede utilizar de forma manual.

  • Color: Azul y blanco
  • Material: Tela (100% poliéster) con revestimiento de PU, acero
  • Anchura: 100 cm
  • Proyección máxima: 120 cm
  • Altura de instalación flexible: 200-300 cm
  • Diámetro de la barra de soporte: 15 mm
  • Longitud de manivela: 125 cm
  • Operado manualmente
  • Repele el agua y la suciedad
  • Alta resistencia a la luz
Nunca lo instale en lugares altos y ventosos, ya que el parasol podría caerse y herir a las personas. El toldo debe retraerse si la velocidad del viento supera los 27 km/h.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.