Skip to product information
  • Trendteam Estantería de baño SanDiego blanco y plata ahumado

Trendteam Bathroom shelf white and smoked silver

71,01 €
71,01 € 79,92 €
You save 11% (8,91 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Sandiego de Trendteam bathroom is perfectly integrated into the bathroom and provides a wide storage space for towels, makeup and personal toilet items. Durable agglomerate coated with melamine: The bath shelf is made of agglomerate with melamine finish, which guarantees its long -term use and gives a modern touch to the bathroom. Smoked silver finish: White body and front parts with smoked silver details create a timeless style that is integrated into the bathroom harmoniously. The surface, suitable for humidity areas, is very resistant and easy to clean. Practical bathroom furniture: This bathroom furniture has a lot of storage space thanks to the three open compartments. Note: This bathroom is part of a set and can be easily combined with the other sandwear bathrooms, which are sold separately.

  • Color: White and smoked silver
  • Material: Mellamine coated agglomerate
  • Dimensions: 32 x 28 x 103 cm (wide x high x high)
  • Bath shelf with 3 open compartments
  • Wood material with FSC certificate
  • Resistant melamine coating surfaces
  • Suitable surfaces for wet stays
  • Easy to maintain surface
  • Easy to ride

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.