Skip to product information
  • Vetonek Tumbona con capota de ratán sintético gris antracita

Tumblea with a synthetic gray gray rack anthracite

622,94 €
622,94 € 701,11 €
You save 11% (78,17 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This loup is an ideal partner for your vacation or free time, and will allow you to relax and enjoy next to the pool, in the garden, on the terrace, etc. It will allow you to demonstrate your appreciation for an elegant environment, as well as your modern lifestyle. It is made of Ratán Pe, which is a lasting, waterproof, weathering material, to UV rays, spots resistant, easy to clean and sovereign everything, respectful of the environment. Thanks to the thick removable seat and support cushions, the lounge offers a lot of comfort. The folding white awning will protect you from sunburn while you read or relax in the sunbed in sunny days. Built with a robust and at the same time light steel structure, this modern Loom of Ratán will bring you years of enjoyment. This product is easy to mount. Note: We recommend covering the sunbed in case of rain, snow or frost.

  • Color: Anthracite gray
  • Material: Powder coating steel, Ratán Pe
  • Cushion material: polyester and cotton
  • Total size of the sunbeone: 204 x 97 x 64 cm (length x width x high)
  • Total height with awning: 118 cm
  • Cushion thickness: 6 cm
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x lounge with roof
  • 2 x support cushions
  • 1 x seat cushion

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.